Special | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | ALL
sanding is a faster sanding process using specialized machines to hold the sandpaper and work the surface. This method is good for large areas, production
work, and a more consistent finish
The magazine is the spring loaded chamber of a nailer for holding a supply of collated nails to be fed automatically into the gun
A masker is a hand tool that loads and dispenses tape and masking plastic or paper rolls quickly for production prep work
Masking is a prep process where tape and plastic or paper sheets are used to protect areas that do not receive paint
Masking tape is a roll of adhesive paper or plastic used to prevent
paint from being applied to certain areas
Matte is a term to describe a paint sheen with a no gloss finish. Also called “flat”
A miter is an angle cut made with the broad face of the board lying flat on the base of a miter saw and the vertical blade pivoted left or right to form an angle
Miter angle gauge
A miter angle gauge indicates the angle a miter saw is set to. Usually from 0 to up to 45 or more degrees.
A miter gauge is a saw feature that allows for crosscuts in the material on a saw made for rip cuts
A miter latch is a catch that automatically clicks into predetermined angles on a miter saw, like 0 and 45 degrees.